BIG BLOCK CHEVY BLOWER KIT
TBS BILLET CASE 8-71 BLOWER
 
TBS Billet 8-71 Blower, TBS Blower manifold, 8mm Drive, Large Rotor 871 Blower more
Indent 4 to 6 weeks Std Deck $6531.00 plus GST
MORE Click image on left
Tall Deck $6589.00 plus GST

BIG BLOCK CHEVY 250ci BLOWER KIT
TBS BILLET CASE LOW PROFILE BLOWER

Super quality Low profile 250 ci billet blower. 10.560" tall std deck, 10.850" tall tall deck. This kit features a wide 16 rib 2 3/8" belt to avoid slippage under boost more
Indent 4 to 6 weeks
$4988.00 plus GST
MORE Click image on left Tall Deck $5062.00 plus GST

SMALL BLOCK CHEVY BLOWER KIT
TBS CAST CASE 8-71 BLOWER

TBS Small Rotor 8-71, Manifold and 8mm Drive
These blowers will provide better street street/strip low end
  and mid range torque more MORE Click image on left
Indent 4-6 weeks Std Port to 1206 gasket $5869.00 plus GST, Lge Port Kit 1206 up $5925.00 plus GST

SBC/BBC CHEVY BLOWER KIT
TBS BILLET CASE 6-71 2 LOBE BLOWER

TBS Large Bore 6-71 with New 2 lobe Rotors, Manifold and 8mm Drive. Excellent for up to 10psi Street Strip Combinations more MORE Click image on left
Indent 4-6 weeks Std Port $6278.00 plus GST, Lge Port SBC Tall Deck BBC $6335.50 plus GST 8-71 Add $75.00
SBC/BBC CHEVY BLOWER KIT
GMC Re-Manufactured 6-71 BLOWER KIT

GMC Small Rotor 6-71 with TBS Billet End Plates, Manifold and Billet 8mm Drive.Perfect Big or Small Block street/strip Blower lmore MORE Click image on left
Indent 4-6 weeks Std Port $5514.00 plus GST, Lge Port SBC or Tall Deck BBC $5641.00 plus GST
SMALL BLOCK CHEVY 192ci BLOWER KIT
TBS BILLET CASE LOW PROFILE BLOWER

Super quality Low profile 192 ci billet blower. 8.625" tall. This kit features a wide 16 rib 2 3/8" belt to avoid slippage under boost more MORE Click image on left
Indent 4-6 weeks Std Port: Takes up to 1206 gasket
$4890.00 plus GST
BILLET CASE LARGE BORE 8-71 BLOWER
The Blower Shop Difference

Hard Anodized Inside case, Billet case Billet End Plates Front or Rear Offset Click image on left

Indent 4-6 weeks
$3790.00 plus GST
CAST CASE LARGE or SMALL BORE 8-71 BLOWER
The Blower Shop Difference

Hard Anodized Inside case, Billet End Plates Front or Rear Offset Click image on left
Indent 4-6 weeks Small Bore $3175.00 plus GST
Indent 4-6 weeks Large Bore $3559.00 plus GST
BIG BLOCK CHEVY BLOWER KIT
TBS BILLET CASE 10-71 BLOWER
 
TBS Billet 10-71 Blower, Billet Rotors, TBS Blower Manifold, 8mm Drive, Studs Gaskets more
Indent 4 to 6 weeks Std Deck $7761.00 plus GST
MORE Click image on left Tall Deck $7819.00
plus GST
BIG BLOCK CHEVY BLOWER KIT
TBS BILLET CASE 14-71 BLOWER
 
TBS Billet 10-71 Blower, Billet Rotors, TBS Blower Manifold, 8mm Drive, Studs Gaskets more
Indent 4 to 6 weeks Std Deck $7915.00 plus GST
MORE Click image on left Tall Deck $7973.00
plus GST
BB CHRYSLER TBS BLOWER KITS
Complete 'BLOWER SHOP' BB fully polished Chrysler blower kits. in 6/8-71 up to 14-71. Choose either 'Billet' or 'Cast' case, Small or Large Rotor 8-71.
Kits come with a polished BDS blower manifold.
Indent 4 to 6 weeks
Small Rotor Cast Case 8-71 $6310.00 Plus GST
Billet Case Large Bore 8-71$7030.00 Plus GST
Billet Case Large Bore 2 lobe 6-71$6932.00 Plus GST
WEIAND FORD KITS
Engineered to fit Small Block Fords 289/302 (or stroker versions based on the 8.200" deck height)
This 174ci blower features teflon tipped rotors for tighter rotor to case tolerances and only requires a small cowl induction hood for most applications
Indent 4 to 6 weeks
289 - 302 $4400Plus GST SATIN 10 Rib Belt
289 - 302 $4940-Plus GST POLISHED 10 Rib Belt
BB FORD TBS BLOWER KITS
Complete 'BLOWER SHOP' BB fully polished Ford blower kits. in 6/8-71 up to 14-71. Choose either 'Billet' or 'Cast' case, small or large rotor 8-71.
These kits come with either a 'Blue Thunder' (right picture) or BDS (left picture) blower manifold.
Indent 4 to 6 weeks
Small Rotor Cast Case 8-71 $6335.00 Plus GST
Billet Case Large Bore 8-71$6943.00 Plus GST
FORD HAMPTON KITS
Complete Ford Kits polished Remanufactured GMC Blower, Manifold, Drive system, Dual Carb Adapter hardware - gaskets, will fit Std flat Cap Mallory Dist
Indent 6 to 7 weeks
289 - 302 - 351w - 427-428 $6480.00 Plus GST
351C - $6395.00 Plus GST
CHRYSLER HAMPTON KITS

318 -340 -360 - 383 - 440 $6198.00 Plus GST

HOLDEN PARTIAL KITS
304 308 Less Manifold
ABD/TBS/NEWBY kits
Order your Manifold direct from Newby in Australia and we will supply everything else to supercharge your 308 or 304 Holden engine.
Choose a Short Rotor Billet Case 6-71
$5364.00 Plus GST or
a Small Bore 8-71 $5263.00 Plus GST
Indent 3 to 6 weeks

Due to floating exchange rate, indent prices are 'Fixed Margin' Indicative.

NEW TBS DUAL CARB BLOWER SCOOP
Performance full size TBS Hilborn Style Blower Scoop for 4150 style carburetors,inline or sideways mount, Includes: K&N Filters, top plates, gaskets, and hardware, 8 5/8" center to center spacing,
$556.00 plus GST

BLOWER SHOP RACING STUDS
6061 T6 SFI RATED Aluminum Racing Studs with 'Integral washer' Nuts
$95.00 plus GST

BELT GUARD
These SFI Rated Belt Guards will meet drag race requirements and will also provide for belt protection on your Street machine.
They are supplied without the spacer 'stand-off' kit because of the many different spacings.
$345.00 plus GST

BELT GUARD
These Street Belt Guards bolt to the front cover bolts and extend directly out to provide protection on your Street machine.
They are supplied in 6" 7.5" 8.5" and 12" or can be shortened to suit.
$295.00 plus GST
DUAL SIDEWAYS LINKAGE
This linkage kit will setup your sideways mount carburetors. They feature needle roller trunions and splined shafts for secure operation

$228.00 plus GST

BLOWER NOSE
3.9" 5.15" 5.90".6.90"

Billet 48 Spline Comp Nose
Gun drilled Lightened

From $600.00 Plus GST

BASE GASKET
Universal
6 Thru 14-71

Cut To Suit

$32.00 Plus GST

TOP PULLEY SPACERS
With Longer Bolts and washers
1/4" 3/8", 1/2", 3/4", 1", 1 1/2"

For 2" Flange Register

From $77.90 Plus GST
BLOWER SCREEN
Universal, fits all blowers
with 6-71 bolt pattern on top

Protects from foreign objects

$32.00 Plus GST
IDLER BRACKET
Universal - Billet Polished
Billet with spacers and hardware

Fits GMC Style Blower Brands

$230.00 Plus GST
RELIEF VALVE
1/8" NPT Thread
Red and Blue 7/16"unf
Available also

$27.00 Plus GST
POP OFF VALVE
Universal - Billet Polished
3 3/4" x 1 1/8"

Fits GMC Style Blower Brands

$65.00 Plus GST

BLOWER SEALS
1.175"id and 1.312" id
Rubber or Double Teflon
Rubber $17.00 Plus GST
Teflon $30.00 Plus GST

VAC/BOOST GAUGE
Autometer 2" Diam
Vac 30": Boost 20lbs
Includes 6'Nylon Tube & Fittings

$137.00 Plus GST

BLOWER GEL
Spray into Blower improve
lube and sealing, for alc or
nitro wont wash off, 36oz can

$52.00 Plus GST



NEW CHERRY STAINLESS FUEL LINES
Stainless fittings Sideways Mount
Dual Holley QFT or Demon
Stainless Steel 4150 Dual Carb Blower Fuel line kit
$338.00 plus GST

NEW CHERRY STAINLESS FUEL LINE
Blue or Black fittings Sideways Mount
Dual Holley QFT or Demon

Stainless Steel 4150 Dual Carb Blower Fuel line kit

$285.00 plus GST N

NEW CHERRY STAINLESS BRIDALS
Stainless, Blue or Black fittings
Designed to give you that super clean look.
Join up your dual fuel line kits
for a single entry from your fuel pump or regulator
Stainless $146.00, Blue or Black $140.00 plus GST N
NEW CHERRY STAINLESS 4160 KIT
FOR IN LINE BLOWER CARBS
For Dual 600 Vac Sec style Holley's. Designed to give you
that super clean look.
Hook up your In-line Carbs now with Cherry's latest
stainless innovation. 8 5/8" center spacing.

Stainless $338.00, Blue or Black $295.00 plus GST
CUSTOMER PICTURES AND EVENTS


ALS BLOWER DRIVES AT BEACH HOP 2013

Al and LUKE SHADWICK












ALS BLOWER DRIVES
Info: Contact (AL) Alan Shadwick
Als Blower Drives
Unit 1/ 42 Henderson Valley Road Henderson,1008, Auckland New Zealand Ph/fax 09 837-0624
Website: www.alsblowers.com
E-mail al@alsblowers.com