OPTIONAL SC500, SC500-256, SC500-250 SPACER, DISTRIBUTION BLOCK AND DUMMY HARDLINES

To complete that real serious look for your SC500 STREET CATCHER installation, you can order an optional 1" high machined and drilled spacer and distribution block that you can fit flexible rubber or stainless steel braided hoses to, Pt No SC500SP-DB, or you can order it with authentic Enderle style stainless steel hardlines Pt No SC500SP-HL-DB.

The spacer can be placed between the SC500 base adapter and the blower, it adds plenum and is necessary to provide clearance between the hardlines and the standard STREETCATCHER Holley and Demon Double Pumper throttle linkage that operates the butterflies in the SC500 STREETCATCHER application.
SUPER QUALITY FOR SERIOUS RODDERS



SPACER WITH DISTRIBUTION BLOCK AND HARDLINES

The SC500SP-DB-HL
Comes as a complete kit with fittings, hardlines and polished spacer that is 1" high for mounting under the SC500 Sc500-250 and the SC500-256 series STREETCATCHERS

SPACER AND DISTRIBUTION BLOCK WITHOUT HARDLINES
The SC500SP-DB
Comes as pictured (second image down) without the Stainless steel hardlines and fittings so you can run either flexable rubber or flexable stainless braided hoses

NOTE: You cannot rob the hardlines off an old Enderle injector and use them on this spacer setup, they wont fit. The drilled positions of the tubes are different to an Enderle injector. A change had to be made so that the hardlines could be standardised to fit both the SC500 and SC520 Streetcatcher Dual carb model as well, this needed tube repositioning to clear the needle valves on dual sideways setup.