Within
engine familys the distributor clearance could change marginally
(providing more distributor clearance) depending on where
the carburetor mounting pad is set (fore and aft) in relation
to other
intake
manifolds for that same engine engine.
SMALL
BLOCK CHEVY ENGINES
The STREETINDUCTION wont clear an HEI GM electronic ignition
unless you cut into the back of the STREETINDUCTION base
for clearance, you would need to put a smaller diameter distributor
in like a Mallory or Accel, or a Standard early Chevy points
type distributor will fit and you can also get that design
as a simple drop in quality replacement electronic ' Pro
Billet' distributor from MSD Part No 8360.
If absolutely necessary you can cut the back of the IN600STREETINDUCTION
body for HEI clearance if you want to or 'have money' in
your distributor, this has been done succesfully but it takes
fabricating skills and its just a lot easier to fit a smaller
distributor in.
BIG
BLOCK CHEVY ENGINES
Generally Speaking the IN600 STREETINDUCTION will fit Big
Block Chevy's with an HEI
FORD
ENGINES
Images below, among others, show a Small block
Ford (around a Mallory size distributor) and a Cleveland
pictured
is
a
MSD Pro Billet Distributor, Generally with
a Big Block Ford
